Showing 13–23 of 23 results
-
Sale!
$35.99 Original price was: $35.99.$28.00Current price is: $28.00.
- Primary output voltage (vdc): 5
- Output current (a): 60
- Maximum output power (w): 350
- Family: lrs-350
- Input voltage (vac): 90 to 132, 180 to 264
-
Sale!
$39.99 Original price was: $39.99.$30.00Current price is: $30.00.
- Fits Ender 3, 3 Pro, Ender 5, 5 Pro, CR10, and similar models.
- ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz;
- Upgrade the firmware by SD card. It is easy and convenient to operate.
- This display board has higher compatibility. Users can select two work modes: UART serial port screen mode and 12864 screen mode.
- Serial port screen mode supports two printing modes: SD card and U disk.
- Reserve WIFI port and WIFI function is realized by an external WIFI module.
- LCD12864 mode uses EXP1, EXP2, and EXP3. EXP1 and EXP2 are LCD screen ports of a normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.) ï¼›
-
Sale!
$49.00 Original price was: $49.00.$39.00Current price is: $39.00.
-
Sale!
$50.99 Original price was: $50.99.$44.99Current price is: $44.99.
- SKR MINI E3 V2.0, version: V2.0
- The hot-bed MOS tube uses WSK220N04, a low on-resistance, a larger heat dissipation area, and reduces heat generation
- Optimize the plate and the frame to avoid the phenomenon of screw hole gaps. Avoid the phenomenon of screws hitting components.
- Add a parallel double Z-axis interface.
- Supports BLtouch, detection of blocked rotation, resumption of the shutdown, shutdown after shutdown, etc .;
-
Sale!
$26.00 – $29.00
Brand new double-layer textured PEI powder steel plate.
235x235mm sheet
Fits Ender 3/3Pro, Ender 5/5Pro or any printer with 235x235mm bed size
-
Sale!
$41.00 Original price was: $41.00.$40.00Current price is: $40.00.
- 1.4GHz 64-bit quad-core processor, dual-band 2.4GHz, and 5GHz wireless LAN. Bluetooth 4.2/BLE, faster Ethernet, and PoE support (with separate PoE HAT).
- Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps), 4 × USB 2.0 ports, and Extended 40-pin GPIO header.
- 1 × full-size HDMI, MIPI DSI display port, MIPI CSI camera port, 4 pole stereo output, and composite video port.
- 1GB LPDDR2 SDRAMï¼›Micro SD format for loading operating system and data storage. (Micro SD is Not included.)
-
Sale!
$145.00 Original price was: $145.00.$130.00Current price is: $130.00.
- Raspberry Pi 4 Model B 2GB
- 5inch Touch Screen
- 5MP Raspberry Pi Camera
- 16GB Micro SD Card
-
$49.00
BIGTREETECH SKR CR6 V1.0，for Creality CR-6 SE
32-bit ARM-level Cortex-M3 series with 72MHz main frequency STM32F103RET6 chip.
Support BIGTREETECH-3.5 inch TFT color touch screen, LCD12864 screen, CR-6 original screen (DIWEN screen).
Dual Z-axis connectors.
-
Sale!
$175.00 Original price was: $175.00.$145.00Current price is: $145.00.
- Raspberry Pi 3 Model B+
- 5inch Touch Screen
- 5MP Raspberry Pi Camera
- 16GB Micro SD Card
-
Sale!
$16.00 Original price was: $16.00.$11.00Current price is: $11.00.
- Excellent adhesion: Creality carbon and silicone build surface provide the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand.
- Convenient to use: The new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Clean with water or alcohol. Easy to remove your print by hand or with a scraper.
- High-performance: As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.
- Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃.
- Compatibility: Compatible with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3X.
-
Sale!
$20.00 – $24.00
- Dual Z kit for Ender 3, 3 Pro, V2, V2 Neo, and similar printers.
- Â Added Stability to the X-axis.
- Compensates Added weight due to Direct Drive upgrade.
