Showing 13–24 of 55 results
-
Sale!
$13.99 Original price was: $13.99.$6.00Current price is: $6.00.
-  Nema17 Stepper Dampers are used to decrease noise and resonance in your CNC and 3D Printer, eliminating vibration and effectively improving 3D printing quality
- Each package contains 12 pieces of screws for you to use, enough for you to use and can provide a lot of convenience in the process of using
- 1 Damper used per Stepper or Electric motor
- 3D Printers see a 5-10dB reduction in noise when used on X and Y-Axis steppers with the vibration damper for NEMA 17
- Works on both Cartesian and Delta style Additive Manufacturing machines such as CR-10 Pair these with good filament for the best results in your 3D printer and remove vibration and noise
-
Sale!
$32.00 Original price was: $32.00.$14.90Current price is: $14.90.
Ender 3 Direct Drive Upgrade kit
Aluminum Alloy Ender 3 Direct Drive Upgrade Kit Plate For Creality CR10, Ender 3, Ender 3 Pro. Direct Extruder Adapter Plate, Complete kit.
-
Sale!
$22.00 Original price was: $22.00.$19.99Current price is: $19.99.
Makerbase Mks TS24 Touch Screen For Mks Dlc32 V2
-
Sale!
$269.99 Original price was: $269.99.$199.99Current price is: $199.99.
- Twotrees TT-5.5S adopts the latest LD+FAC+C compressed spot technology, which makes the light source more concentrated and the laser spot: 0.08×0.1mm. engraving is more accurate (0.01mm) and cutting ability is more powerful.
- Our engraving machine does not need to adjust the focus before engraving. More convenient to use and more stable during engraving. The transmission speed is 115200 (baud rate). And has an engraving speed of up to 8000mm/min. Machine output power: 40W.
- The laser can cut 5mm plywood, 3mm acrylic, 0.7mm leather, 3mm carton, the laser can engrave plywood, acrylic, leather, pebbles, anodized aluminum, density board, painted metal, etc. Working area: 300x300mm.
- Support LaserGRBL, LightBurn. free software LaserGRBL (for Windows system), paid software LightBurn (for Windows, Mac system). Support vector and image file formats such as NC, DXF, BMP, JPG, PNG, etc.
-
Sale!
$12.99 – $18.99
- Original and high-quality 3D Printer accessories for Creality Ender 3
- Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
- MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 24V 40W
- Tip of the nozzle, aluminum heating block, throat pipe
- Suitable For Creality Ender 3 / 3 Pro or similar printers
-
Sale!
$19.99 Original price was: $19.99.$9.00Current price is: $9.00.
- Right-hand extruder kit – Perfect replacement for Creality 3D Printers Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. and similar 3D Printers.
- Full metal aluminum alloy, DIY kit and you need to assemble by yourself. The extruder includes all the necessary screws & parts needed to directly replace your old original Creality plastic extruder.
- All you do is unbolt the old original Creality plastic extruder & screw in the new “Metal Extruder” and ready to start printing. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
- The advantage of this extruder is you have better stronger pressure pushing the filament into the printer nozzle and so will improve on the printers’ performance.
- The extruder has an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
-
$2.00
- Experience the low-cost WiFi module that has taken the maker world by storm.
- The ESP8266 is a highly integrated SoC designed for the connected world.
- It features a complete, self-contained WiFi networking solution on a single chip.
- The on-board processor with integrated storage functions as a standalone microcontroller with GPIO, providing an easy and inexpensive way to integrate with sensors and standalone devices.
- The chip comes soldered to a breakout board with an integrated antenna and associated components, making it easy to get up and running.
-
Sale!
$13.15 Original price was: $13.15.$10.99Current price is: $10.99.
- Wemos D1 R32 is Much faster and a lot cheaper than Arduino WiFi
- ESP32 Wi-Fi + Bluetooth + BLE and 4MB Flash Memory
- Arduino UNO Form Factor to use with Arduino Shields
- This is a 3.3V Device. Input Voltage 5 to 12V
-
$45.00
- Super silent TMC2208 drivers.
- Upgraded 32bit chip
- Direct fit with Ender 3/ 3 Pro/ 3 V2/ Ender 5 / Ender 5 Pro.
- Bootloader pre-installed, Update the firmware with SD card only
- Separate port for BLTouch, No pin27 adapter needed
- Separate port for filament detection sensor.
-
Sale!
$22.00 Original price was: $22.00.$15.00Current price is: $15.00.
- Double-gear and double-pneumatic joint extrusion structure, high extrusion force, enhancing the feed strength, ensuring smooth feeding, better pressure pushes the filament into the printer, not easy to lose steps.
- Perfect replacement for 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/Ender 3 pro/Ender 5/Tornado, etc. For 1.75mm filament.
- All-metal aluminum alloy, High-quality dual gear extrusion, Compare to the normal plastic drive, this high aluminum metal dual gear extruder is stable and durable.
- The product material adopts brand-new imported aviation aluminum material and is processed by CNC imported from Japan. DIY：You can simply install it by yourself.
-
Sale!
$25.00 – $30.00
- Fully assembled MK8 extruder set For Ender-3/ Ender-3 Pro/ Ender 5/ Ender 5 Pro and similar3D printer.
- Includes 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, Teflon Bowden, thermistor sensor, heating tube, etc.
- Stainless steel material nozzle throat and high-quality whose temperature can up to 260 °C/ 500 °F
- 24V high-speed fan, lose heat quickly and efficiently; nozzle and tube connect seamlessly, prevent material leaking and blocking.
- 100% brand new and durable and good performance, fully assembled, you can install directly in your 3D printer.
-
Sale!
$35.99 Original price was: $35.99.$28.00Current price is: $28.00.
- Primary output voltage (vdc): 5
- Output current (a): 60
- Maximum output power (w): 350
- Family: lrs-350
- Input voltage (vac): 90 to 132, 180 to 264
